Beretta.net Forum

1. 2
2. 9
3. 18
4. 20
5. 21
6. 22
7. 6
8. 5
9. 4
10.3
11. 10
12.1

thanks it is all fixed

Beretta_gal wrote:you have 21 twice!!!

beretta94 wrote:1.21
2.20
3.9
4.22
5.2
6.18
7.21
8.10
9.5
10.3
11.6
12.4

1.21
2.20
3.9
4.22
5.2
6.18
7.1
8.10
9.5
10.3
11.6
12.4

ErichZ26 wrote:21mm or 13/16inch

thanks im at work now and can grab one from here

im not at my car right now so what i need to know is what size socket do i need to remove my steering wheel

heavywoody wrote:Just the handle. Pull the U shaped clip out from the front of the shifter to swap them (put it in L and look on the shaft portion of the handle).

thanks....ill be going to the yard this weekend to see if i find one

just ordered the new springs went with these
http://www.ebay.com/itm/130753603482?ss ... 1436.l2649

does the handle fit right on or do i need the whole shifter?

i would like to change the shifter in my 94 z/26 does b & m or someone else make a shifter that will fit right in without any mod's? i have seen members here with shifters with the button on the side and i would be willing to do that if there is not a shift kit available...what are these t knobs...

well to today we removed the interior from the 94 z/26 when we lifted up the carpet the floor was soaked! the top of carpaet was dry but the underside of carpet and floor is very wet...good news is there is no rust! so i know berettas are famouse for taking in water where should i start for a leak t...

If you want Eibach's they can still be found, it's just getting harder. I can tell you for sure that the stock springs from VPI will cost almost twice as much. I was looking to upgrade my 95 base, got the part numbers from GM and looked them up on VPI.The price for just the front springs was almost...

Moog for a more or less stock hight and they are more than stiff. Thats not his objective... what else is out there would like to lower car abit and Moog isn't FE3 setup so if he has Z26 springs he may actually notice a height increase if they are FE1 spec. If you can read the paper code on your sp...

all 94's were the same so don't worry about that application on ebay they will fit. Apex is another brand. Its up to you on which you want. Do some research on those companies to see what comes up. i saw the eibach were 1 in front and .08 in back...these apex are 1.4 is that going to change the car...

Whats the brand from Andys? unless you find used Eibach's then you'll have to go with Sprint or ST aka Suspension Techniques... Neither are GREAT but the Sprint's some have said are decent. The struts and shocks you can find on Rock Auto for your application. Rear shocks KG4536 Front Struts 235605 ...

Whats the brand from Andys? unless you find used Eibach's then you'll have to go with Sprint or ST aka Suspension Techniques... Neither are GREAT but the Sprint's some have said are decent. The struts and shocks you can find on Rock Auto for your application. Rear shocks KG4536 Front Struts 235605 ...